Network Intelligent System Controllers.
LNL-X2210 :
|
Intelligent Single Door Controller; powered by PoE, POE+ or 12 VDC @ 1.8A maximum; size 5.5 in. (140 mm) W x 3.63 in. (92 mm) L x 1.33 in. (34 mm) H with bracket; 6 MB standard cardholder flash memory, 50,000 of event memory; maximum of one door, two readers (entry and exit reader, OSDP Secure Channel encryption for one reader with OnGuard 7.2 and up, On-board PoE or PoE+ Ethernet, Dual Path capability, two inputs (supervised/unsupervised) for Door Contact and REX, two outputs (NO/NC), power fault input and cabinet tamper monitors. Reader power 12VDC@ 300mA max. Approvals: FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA C22.2 No. 205-1983, cUL/ORD-C1076
|
LNL-X2220
|
Intelligent Dual Reader Controller – powered by 12 or 24 VDC @ 500mA (w/o Rdr Power),, size (6" (152mm) W x 8" (203mm) L x 1" (25mm)H); 6 MB standard cardholder flash memory, 50,000 of event memory, maximum of 32 devices, On-board Ethernet, Dual Path capability, on-board two door control, OSDP Secure Channel encryption with OnGuard 7.2, Wiegand or F2F; eight inputs, four outputs, cabinet tamper and power fault input monitors. Approvals: FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA C22.2 No. 205-1983, cUL/ORD-C1076
|
LNL-X3300
|
Intelligent System Controller – powered by 12 or 24 VDC @250mA, size (5 in.(127mm) Wx6 in.(152.4mm) L x1 in.(25mm) H); 15 MB standard cardholder flash memory, 50,000 Event memory. Two RS-485 ports for downstream devices, maximum of 64 devices, On-board Ethernet, Dual Path capability, cabinet tamper and power fault input monitors. Approvals: FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA C22.2 No. 205-1983, cUL/ORD-C1076
|
LNL-X4420
|
Intelligent Dual Reader Controller – powered by 12 or 24 VDC @ 500mA (w/o Rdr Power), size (6" (152mm) W x 8" (203mm) L x 1" (25mm)H); 16 MB standard cardholder flash memory (96MB cardholder table can be enabled in OnGuard 7.4 or higher), 50,000 of Event memory, Two RS-485 ports for downstream devices, maximum of 64 devices, On-board Ethernet, Dual Path capability, on-board two door control with OSDP Secure Channel encryption or Wiegand; eight inputs, four outputs, cabinet tamper and power fault input monitors. Approvals: FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA C22.2 No. 205-1983, cUL/ORD-C1076
|
Downstream Devices.
LNL-1320-S3
|
Dual Reader Interface Module (Series 3) - 12/24 VDC; Support OSDP, Wiegand and Clock/Data Readers, 2 reader interface; 8 Inputs; 6 Form C Relays ; ROHS; CE; C-Tick and UL294 Certified.
|
LNL-1300-S3
|
Single Reader Interface Module (Series 3) - 12/24 VDC; Support OSDP, Wiegand and Clock/Data Readers, 1 reader interface; 2 Inputs; 2 Output Relays and Cabinet Tamper Pigtail ; ROHS; CE; C-Tick and UL294 Certified.
|
LNL-1100-S3
|
Input Control Module (Series 3) - 12/24 VDC; 16 Zone Input Monitor Module ; (32) 1K Resistors (with 2 Programmable Output Relays) ; ROHS; CE; C-Tick and UL294 Certified.
|
LNL-1200-S3
|
Output Control Module (Series 3) - 12/24 VDC; 16 Relay Output Control Module ; ROHS; CE; C-Tick and UL294 Certified.
|
LNL-1324e
|
IP-based Dual Door or I/O Interface, support ONLY max 4 OSDP readers, full two door support. Can be used as an Alarm Panel without readers, 6 inputs and 4 relay outputs. Power options PoE, PoE+ or 12 VDC. Communicates via IP to Controller (LNL-X2210, LNL-X2220, LNL-X3300, LNL-X4420). Requires OnGuard 7.6 or higher.
|
LNL-8000
|
Star Multiplexer –12 VDC, (8) Downstream RS-485 2-wire ports or (4) RS-485 4-wire ports and stand-offs
|
Please contact us for a quote. We look forward to hearing from you. Tel : +44 (0) 333 210 6000 or Email: sales@stsl.co.uk